Model Name: HEXTECH Industrial Fluidworks
Model Designer: Thunderhead Studio
Model Line: Sci-Fi 6mm
Production: Steel Warrior Studios 3D Printing Service
Kit Material: PLA FDM Plastic
Configuration Options: N/A
Scale: 6mm (1/285)
Measurements: Varies per building
Hextech - Industrial Fluidworks serves a vital roll in both the industrial ventures of mankind, as well as supporting their urban sprawls with mostly fresh drinking water and some sewage processing. Manufacturers soon discovered that not every planet being colonized or mined on would allow for pipes to be installed into the ground and so great effort was made to create a system of elevated pipe clusters that could be laid out across any landscape. Mass produced and easily interchangeable, these soon became the universal standard.
HEXTECH terrain is built on 33mm Hex Bases which is completely compatible with the Battletech Tabletop game.
The Industrial Fluidworks has the new HEXTECH UNIVERSAL basing system, which gives you the ability to switch between hexed and hexless play in seconds. The Universal bases have an optional magnetic system that can be used to enhance the feature.
HEXTECH is a hexed, modular 6mm scaled wargaming terrain product line that is designed to accommodate games such as Battletech. To find out more details on the many features and advantages HEXTECH offers, please click HERE for a complete breakdown of why its such a popular system.
Magnet size: 1/8" x 1/16" or 3x2mm will give you a good fit. Some simple trimming on the sockets may be required to get a good fit, use a sharp knife and be careful.
Polarity Tip: If you socket one polarity to all the "Male" ports and then the opposite polarity to all the female
ports/sockets, you will avoid problems with pieces having conflicting polarity. This will require a bit
of organization in advance, and we recommend you save the magnet installation until you've printed the entire
kit and do the installation all at once so you don't have to keep track of it over a long period of time.
Magnets not included.
We print our terrain on a variety of well tuned FDM 3D printers. For general information on 3D printed terrain you may find our FAQ helpful.
Entry Set: (2) Small Fluid Tanks, (2) Ground Pumps, (3) Male to Male Pipe Connectors, (4) HEXTECH Universal Bases
Starter Set: (1) Large Fluid Tank, (3) Small Fluid Tanks, (3) Ground Pumps, (6) Male to Male Pipe Connectors, (7) HEXTECH Universal Bases
Tank Farm: (1) Large Fluid Tank, (4) Small Fluid Tanks, (1) Ground Pump, (2) 3 Way Pipe Connectors, (4) Bending Pipe Connectors, (3) Male to Male Pipe Connectors, (6) HEXTECH Universal Bases
Demi Compound: (1) Pressure Tower, (2) Large Fluid Tanks, (2) Small Fluid Tanks, (2) Ground Pumps, (4) Male to Male Pipe Connectors, (2) Male to Female Pipe Connectors, (2) Bending Pipe Connectors, (7) HEXTECH Universal Bases
Trinity Waste & Water: (1) Large Processing Plant, (2) Pressure Towers, (2) Large Fluid Tanks, (2) Small Fluid Tanks, (2) Ground Pumps, (1) 3 Way Pipe Connector, (1) Bending Pipe Connector, (10) Male to Male Pipe Connectors, (2) Female to Female Pipe Connectors, (9) HEXTECH Universal Bases
Pipe Booster: (2) Bending Pipe Connectors, (2) 3 Way Pipe Connectors, (4) Female to Female Pipe Connectors, (4) Male to Male Pipe Connectors, (2) Male to Female Pipe Connectors.
**Please Note: We stock a large quantity of pre-printed terrain at all times, however due to overwhelming demand during new releases, sales and general attrition throughout the month, it is possible we will need to print some pieces to fill your order. An accurate timeline of order processing can be found at the top center of the page in the header or HERE**