Model Name: Trinity City Starter Set
Model Designer: Thunderhead Studio
Model Line: Sci-Fi 6mm
Production: Steel Warrior Studios 3D Printing Service
Kit Material: PLA FDM Plastic
Configuration Options: N/A
Scale: 6mm (1/285)
Measurements: Varies per building
Hextech - Trinity City is a massive, rich city state that is the envy of the galaxy. At its very center of its downtown are towering superstructures and the offices for the wealthy and influential, the cities elite. As you leave the core of downtown you enter the slums, a packed, mass housing project that spans as far as the eye can see. These "Slums" vary in quality depending on the proximity to downtown, the farther from the core of the city the more rundown things become. At the edge of the cities border is a massive Defensive Curtain of Armored Walls and Fortified Sigma Mech Hangers, housing the majority of the cities independent defense forces. Built high enough to prevent all but the most agile enemy mechs from jumping the walls, it is a formable sight to both the enemies outside the walls, and to those within the walls who would attempt to draw the city into chaos from within.
Trinity City is the centerpiece your table needs to stand out among the crowd.
The ultimate urban starter bundle. A nice combination of structures and roads gives you a great deal of flexibility on how you setup the board, without breaking the bank. A total of 87 Hexes of board coverage.
Trinity City Core Bundles now have the new HEXTECH UNIVERSAL basing system, which gives you the ability to switch between hexed and hexless play in seconds. The Universal bases have an optional magnetic system that can be used to enhance the feature.
HEXTECH is a hexed, modular 6mm scaled wargaming terrain product line that is designed to accommodate games such as Battletech. To find out more details on the many features and advantages HEXTECH offers, please click HERE for a complete breakdown of why its such a popular system.
Magnet size: 1/8" x 1/16" or 3x2mm will give you a good fit. Some simple trimming on the sockets may be required to get a good fit, use a sharp knife and be careful.
Polarity Tip: If you socket one polarity to all the "Male" ports and then the opposite polarity to all the female
ports/sockets, you will avoid problems with pieces having conflicting polarity. This will require a bit
of organization in advance, and we recommend you save the magnet installation until you've printed the entire
kit and do the installation all at once so you don't have to keep track of it over a long period of time.
Magnets not included.
We print our terrain on a variety of well tuned FDM 3D printers. For general information on 3D printed terrain you may find our FAQ helpful.
4 Two Stack Slum Buildings
2 Bridged Slum Buildings
1 Large Church/Store
4 Single Stack Slums
Starter 2 Lane Road System Bundle
6 - 2 Hex Straight Sections
1 - 4 Way Intersection
4 - Dead Ends
**Please Note: We stock a large quantity of pre-printed terrain at all times, however due to overwhelming demand during new releases, sales and general attrition throughout the month, it is possible we will need to print some pieces to fill your order. An accurate timeline of order processing can be found at the top center of the page in the header or HERE**