Model Name:  Industrial Fluidworks
Model Designer: Thunderhead Studio
Model Line:  Sci-Fi 6mm 
Production: Steel Warrior Studios 3D Printing Service
Kit Material: PLA FDM Plastic
Configuration Options: N/A
Scale: 6mm (1/285)
Measurements: Varies per building

  __________________________________________________________________________________

Fluff Description

Industrial Fluidworks serves a vital roll in both the industrial ventures of mankind, as well as supporting their urban sprawls with mostly fresh drinking water and some sewage processing.  Manufacturers soon discovered that not every planet being colonized or mined on would allow for pipes to be installed into the ground and so great effort was made to create a system of elevated pipe clusters that could be laid out across any landscape.  Mass produced and easily interchangeable, these soon became the universal standard. 

 __________________________________________________________________________________

Product Details

This product has sockets for magnets that allow you to easily connect and change out parts as desired.  Please read the Magnet information section below. 

MAGNET Readme

Magnet size: 1/8" x 1/16" or 3x2mm will give you a good fit. Some simple trimming on the sockets may be required to get a good fit, use a sharp knife and be careful.

Polarity Tip: If you socket one polarity to all the "Male" ports and then the opposite polarity to all the female
ports/sockets, you will avoid problems with pieces having conflicting polarity. This will require a bit
of organization in advance, and we recommend you save the magnet installation until you've printed the entire
kit and do the installation all at once so you don't have to keep track of it over a long period of time.

Magnets not included. 

A modular 6mm scaled wargaming terrain product line that is designed to accommodate games such as Battletech.  To find out more details on the many features and advantages HEXTECH offers, please click HERE for a complete breakdown of why its such a popular system. 

We print our terrain on a variety of well tuned FDM 3D printers.  For general information on 3D printed terrain you may find our FAQ helpful.  

 __________________________________________________________________________________

Bundle Contents

**These bundles are the baseless version of the Industrial Fluidworks pipes. If your searching for the HEXED base version, please click HERE **

Entry Set: (2) Small Fluid Tanks, (2) Ground Pumps, (3) Male to Male Pipe Connectors, (4) 

Starter Set:  (1) Large Fluid Tank, (3) Small Fluid Tanks, (3) Ground Pumps, (6) Male to Male Pipe Connectors, 

Tank Farm: (1) Large Fluid Tank, (4) Small Fluid Tanks, (1) Ground Pump, (2) 3 Way Pipe Connectors, (4) Bending Pipe Connectors, (3) Male to Male Pipe Connectors, 

Demi Compound: (1) Pressure Tower, (2) Large Fluid Tanks, (2) Small Fluid Tanks, (2) Ground Pumps, (4) Male to Male Pipe Connectors, (2) Male to Female Pipe Connectors, (2) Bending Pipe Connectors

Trinity Waste & Water: (1) Large Processing Plant, (2) Pressure Towers, (2) Large Fluid Tanks, (2) Small Fluid Tanks, (2) Ground Pumps, (1) 3 Way Pipe Connector, (1) Bending Pipe Connector, (10) Male to Male Pipe Connectors, (2) Female to Female Pipe Connectors

Pipe Booster: (2) Bending Pipe Connectors, (2) 3 Way Pipe Connectors, (4) Female to Female Pipe Connectors, (4) Male to Male Pipe Connectors, (2) Male to Female Pipe Connectors. 

  __________________________________________________________________________________

**Please Note: We stock a large quantity of pre-printed terrain at all times, however due to overwhelming demand during new releases, sales and general attrition throughout the month, it is possible we will need to print some pieces to fill your order.  An accurate timeline of order processing can be found at the top center of the page in the header or HERE**